Epoxy Roller Coating
Economic Durability for Light-to-Medium Industrial Sites
System Engineering Overview
Epoxy roller coating is an economical, high-coverage coating system ideal for factories, parking garages, and storerooms where concrete dusting must be eliminated without the capital cost of high-build screeds. Applied in 2 to 3 roller coats over primed concrete.
Key Performance Advantages
Technical Specifications Matrix
| Property Parameter | Certified Standard / Performance |
|---|---|
| Dry Film Thickness | 300 – 600 microns (2-3 coats) |
| Solid Content | 100% Solids or High Solids Solvent-Free |
| Tack-Free Time | 6 – 8 hours at 30°C |
| Abrasion Resistance | < 50 mg loss (Taber CS-17, 1000 cycles) |
| Chemical Resistance | Resistant to motor oils, fuels, mild detergents |
5-Stage Installation Methodology
Surface Scuff Grinding
Mechanical abrading to remove laitance and dirt.
Primer Application
Applying low-viscosity moisture tolerant epoxy primer.
First Roller Coat
High-solids pigmented epoxy intermediate coat.
Final Topcoat
Even cross-roll application for uniform texture and color.
Target Facilities & Industries
Require This System For Your Facility?
Schedule an on-site concrete moisture and hardness inspection. Our engineers will measure your floor and provide an itemized engineering quote.
Request Site InspectionCall: +880 1819-199876Ready To Upgrade Your Floor?
Tell us about your space and get a free site visit and written quote. We will measure your concrete, inspect moisture, and recommend the exact chemical system for your operations.